Type: | Concrete Vibrator |
---|---|
Vibrating Rod Diameter: | 50mm |
Voltage: | 220V |
Vibration Frequency: | 200Hz |
Vibration Force: | 4-5kn |
Idle Operating Power: | 350W-450W |
Customization: |
---|
Suppliers with verified business licenses
Product Description: The upper end is connected to the interior of the Ercun trolley panel, with an effective length of 45 centimeters for all ejections. After installing the plug-in vibrator, check the circuit and air circuit for smooth and complete movement of the vibrator. After positioning the Ercun, run the cylinders one by one to eject the vibrator, leaving a gap of 3cm-5cm between the vibrating rod and the top end. |
|
When pouring to the arch, when the concrete overflows the vibrating rod, the information based air defense warning device installed near the vibrating rod will have an alarm light accompanied by a buzzing sound to indicate the location of the concrete. At this time, the first high-frequency vibrating rod can be activated, and the vibration time is based on the concrete flow rate. After the concrete is compacted and discharged, the vibrating rod stops working. The vibrating rod stops working and running. Lower to the position below the trolley panel to ensure that the mold does not collide with the vibrating rod while the trolley is moving. | |
According to the different vibration times of the concrete grade, the self vibration time and vibration frequency of the construction site are different. Attention: If the high-frequency vibrating rod runs idle for less than 20 seconds, prolonged idle operation will directly affect the service life of the vibrating rod |
Suppliers with verified business licenses